This page describes how entries in PhysioNet/CinC Challenges are evaluated and scored automatically. The method described below has been developed to support the 2018 Challenge.
This page also includes instructions for setting up a replica of the Challenge test environment, which may be useful for debugging Challenge entries.
For previous Challenge test environments, see the archived documentation:
- 2014 (Robust Detection of Heart Beats in Multimodal Data)
- 2015 (Reducing False Arrhythmia Alarms in the ICU)
- 2016 (Classification of Normal/Abnormal Heart Sound Recordings)
- 2017 (AF Classification from a short single lead ECG recording)
Structure of a 2018 Challenge entry
A Challenge entry must be uploaded in the form of a zip archive
entry.zip.) The entry must contain all
source code for your algorithm, as well as any data files required to
run it (e.g., numerical models that are derived from the training
databases.) In addition, the following files must be included in the
top-level directory of the entry:
- A text file listing the authors of the entry (individuals who contributed to the design or implementation of the algorithm), and their affiliations.
- A text file listing the terms for distribution. Official Challenge entries must be distributable under a license approved by the Open Source Initiative.
- A text file containing the names of additional packages that must
be installed prior to compiling and running the entry. Lines
beginning with ‘#’ are treated as comments. Each
non-comment line must contain either the name of a package
python3), or the name of a package followed by ‘=’ and a version number (e.g.,
wfdb = 10.5.25~pre2-0~pn1.) The version number is required if the package comes from the Challenge repository.
- A shell script to be invoked by
/bin/bash. This script is run once, during stage 1 (see below), to compile the entry.
- A shell script to be invoked by
/bin/bash. This script is run once for each record in the database, during stage 2. The name of the record is passed as the first command-line argument (‘$1’), and the script must write its results to
- the entry is unreadable or incomplete
- packages specified by
dependencies.txtare not available or cannot be installed
setup.shdoes not exit within 20 minutes
setup.shfails (exits with non-zero status)
next.shfails on any record
next.shdoes not exit within the time limit (12 × 1012 CPU instructions for the 2018 Challenge)
All of the processing needed to check, evaluate, and score challenge entries is performed on dedicated 64-bit Linux servers, under control of the supervisor script (evaluate). Each server runs several virtual machines (VMs) using qemu and kvm hardware virtualization.
Newly uploaded entries are initially placed into a queue. The oldest entry in the queue is loaded into an idle VM as soon as one is available, and stage 1 processing begins.
Stage 1 (prep): The entry is checked to
be certain that it contains all of the components required by the
rules of the challenge. If so, the packages specified
dependencies.txt are installed. Finally, the
setup.sh script is run. The evaluation ends if
stage 1 does not succeed for any of these reasons:
If stage 1 ends early, the diagnostic output of
(its standard output and standard error output) is reported in the
last case, or an appropriate error message is reported otherwise.
setup.sh exits successfully (with zero status), the
entry is queued for stage 2 processing.
Stage 2 (quiz): The validation data set
is copied into the VM. The entry's
next.sh script is run
for each record in this set. The evaluation ends if stage 2 does not
succeed for any of these reasons:
If stage 2 ends early, the diagnostic output of
next.sh (its standard
output and standard error output) is reported in the first case, or an
appropriate error message is reported otherwise. If all of the training set
records are processed successfully, and all results match the expected results,
and the entry does not include a
DRYRUN file (which forces a premature
exit after completion of stage 2), the entry is queued for stage 3 processing.
In order to be fair to all competitors, the limits on entry running
time are measured in CPU instructions rather than in seconds (since
the exact running time will depend on many factors that are
impractical to control, such as hard disk access speeds.) On a
GNU/Linux system, you can measure the number of instructions used by
your program by running the command
-e instructions:u ./next.sh A00001.
Stage 3 (score): The collected results are compared with the Challenge's reference results to determine performance statistics and scores, which are reported to the user.
Replicating the Challenge test environment
In order to test your entry, it is not necessary to replicate the Challenge test hardware, but it may be helpful to compare it with your hardware to estimate your entry's run time. The dedicated Challenge servers have two quad-core 2.6 GHz AMD Opteron 6212 CPUs and 96 GB of RAM.
Each virtual machine is configured with a single-core amd64 CPU, 4 GB
of RAM, 10 GB of swap, a 40 GB read-write /home partition, and a 5 GB
read-write /tmp partition. The root filesystem is an
overlay filesystem with 10 GB of space for installing
packages. A virtual CD-ROM drive and serial port are used for
transferring data to and from the guest system. A virtual Ethernet
interface is provided only when running MATLAB entries, and only
allows connections to the designated MATLAB license server.
To replicate the Challenge test software environment available within the VMs, install 64-bit Debian 9 (stretch), then install these additional packages:
sudo apt-get install devscripts build-essential zip
(See the complete list of packages included in the base system as of Thursday, 23 August 2018 at 16:34 BRT.)
In addition, enable the PhysioNet Challenge package repository:
sudo tee -a /etc/apt/sources.list <<EOF deb http://physionet.org/physiotools/debian/ stretch-challenge-2018 main contrib non-free deb-src http://physionet.org/physiotools/debian/ stretch-challenge-2018 main contrib non-free EOF gpg --recv-keys BDE026E5901D1BE2 gpg --export BDE026E5901D1BE2 | sudo apt-key add - sudo apt-get update
You may install and use the test software environment on a spare computer if you wish, or in a VM using whatever VM technology you prefer on your favorite host OS. On the Challenge servers, we use qemu-kvm, hosted on Debian GNU/Linux.